DEKK Bolt-On rubber pads have always performed at optimum levels on excavators, skid steers and crawler carrier machines.
The rubber pads reduce the surface damage caused by steel tracks, provide greater strength and wear resistance, reduce machine vibration & noise and minimise the occurrence of pad flex and delamination, providing a proven solution for your machines improved performance.
The domed nut also help to protect the pad bolt from excessive damage whilst in operation and as a result help to extend the operating life of the pads and your machine.
In addition to the secure box packaging all of our rubber pads are supplied in, each set of bolt-on pads have the domed nuts secured to the pad bolts to avoid nuts and washers being lost.
All this is available to our customers at no additional cost. Along with our 12 month warranty on all DEKK rubber pads, our guarantee that they will fit your machine or your money back and our 5% off price beat guarantee, you’ll be hard pressed to find a better range of rubber pads on the market.
There are some easy steps you can take to help extend the life of your rubber pads and the maximise performance of you excavator, skid steer or crawler carrier machine.
Step 1: Ensure you are using the correct rubber pads for your machine and application.
Step 2: Clean your pads after each use by removing dirt and debris.
Step 3: Check that all pad bolts are fastened to the correct tension on your pads and tighten if required.
Step 4: Check your pads for wear and tear before use and replace if required.
If you have any questions regarding any of the above steps please feel free to contact one of our customer support team members who will be able to assist. You can contact them on 1300 335 528 or firstname.lastname@example.org.
DEKK’s range of Rubber Pads are available in 3 configurations i.e. Clip-On, Bolt-On and Chain-Onand have been designed to fit easily onto existing steel tracks on excavators, profilers and drilling machines. DEKK Rubber padsalso help to alleviate surface damage, noise and vibration caused by steel tracks.
Ourrubber pads are manufactured using heavy duty, natural and synthetic fibre Virgin rubber with a life span of 3 to 5 years depending on the application and surface the rubber pads are operating in. In addition, molded into the rubber pad is a 4mm steel core bar for added strength and durability, minimising pad flex and delamination.
Worn or damaged pads can be quickly and easily installed, resulting in reduced maintenance and downtime out in the field DEKK rubber pads can also be used in a variety of applications and conditions to ensure you get the job done.
DEKK Bolt-On rubber padsare designed with a unique 2 holes for pressure relief, allowing sand and other material to pass through them during operation, alleviating buildup of pressure behind the pads, which causes damage or dislodgement of the rubber pads from the machine.
DEKK Clip-on rubber pads are designed to easily clip onto the end of existing steel grouser plates and are used when pre-drilled holes do not exist on the grouser plate. As a result of the clip-on design, operators can safely replace worn pads out in the field without having to get underneath the machine improving safety.
DEKK Chain-On rubber pads are designed to be chained directly onto the track chain using track bolts rather than grouser plates for quick and easy installation.
DEKK rubber pads are supplied with a 12-month Full Replacement Warranty and our guarantee that they’ll fit your machine or your money back. In addition, we will also beat any cheaper competitor price by 5% for the same pad, as a promise to you that our prices are the best.